Wood science is the study of wood as a material that is renewable and of biological origin. The processes and the tools used to utilize the material is what is known as wood technology. Other products are put alongside wood for easy testing and study. The comparison made against other products will include the features of the material against those of wood, the value and the ease it can be worked on. Wood has many advantages and this technology takes the advantages and utilizes them. The wide range of products where wood can be used is just one of the many advantages that give wood an upper hand over other products. Once a tree has been cut down another can be planted in the same spot. The other merit is that a part of the harvested material is at the same time used as energy to produce the product.
The good appearance of your timber made structure cannot be guaranteed if protection of the timber is not done. Wooden structures have to be kept away from water and pests that eat through the wood. The moisture courses the timber to decay and the insects eat through the wood. Alkaline copper Quaternary or the ACQ has turned out to be a very effective way wood preservation. This is a copper-based preservative that is applied to the wood for protection. There are a few disadvantages of this method as a mode of wood preservation. It has been seen corroding most metals for example aluminum in less than six months of its application. The species of the wood and the application of the wood will determine how many chemicals will be used on the wood. The level of chemical concentration will be determined by where the piece of wood is going to be put to use.
The use of copper metal is another method of wood treatment that is fast being accepted. This method, unlike the ACQ, is friendly to the metal fasteners and its gaining popularity very fast. This process is what in other words called the micronized copper wood preservative. The copper metal is applied to the wood as small microscopic particles injected into the wood at high pressure. The difference between this method and the other copper-based methods is that the copper is used as a metal rather than a dissolved material. This process is highly effective and the wood properties and heightened. The timber treated in this way is used in both outdoor and indoor frames that last very long.
Termites cannot eat through timber treated through this method. It is not corrosive to metals used in together with the product. When you use this method to treat wood, then you will not need to worry for at least ten years.